2ND FUNCTION = THE FREQUENCY ZAPPER
The Zapper of
3-in-1 VitalBody
Or
The Stand-Alone VitalZapper
Can be used on its own or with the IR heating belt.
Does not work simultaneously with the ionizing bath.
What the Zapper is:
- A low-voltage frequency generator (9 volts, about 8 milliamperes)
- Three frequencies to choose from: 15 Hz, 2,500 Hz and 30,000 Hz
- A weak pulsed signal passed through the skin with two copper rods
- Sessions of about 10 minutes
- Built into the 3-in-1 VitalBody, or available as the stand-alone VitalZapper
- Wet the skin and the copper rods for good contact
- Choose a frequency on the device
- Hold the rods, or place them opposite each other (hands, under the feet, hips)
- Run the session for about 10 minutes
- Switch off, then rinse and dry the skin
What users tell us:
Many users tell us they enjoy their zapper sessions as part of a calm wellness routine, alongside the ionic foot bath and the heating belt. These are personal experiences, not proven results, and they vary from person to person. The zapper is a wellness device: it is not intended to diagnose, treat or cure any disease, and it does not replace advice or treatment from a health professional.
Principle of operation:
The Zapper is a low-voltage frequency generator. Inside, a 555 timer chip, a very precise and widely used timing component, produces stable square-wave pulses with a positive offset. This weak signal (9 volts, about 8 milliamperes) passes through the skin between the two copper rods. Most people feel nothing at the higher frequencies and a light tingling at the lowest one.
You can choose between three frequencies on the device: 30,000 Hz (the high frequency associated with Dr. Hulda Clark; usually no sensation), 2,500 Hz (the intermediate frequency associated with Royal Raymond Rife; few sensations) and 15 Hz (the low frequency associated with Don Croft; a light, perceptible tingling). These frequencies come from the work of these researchers. Claims about their effects in the body have not been confirmed by clinical research, so we present them simply as the settings available on the device.
What you may feel. Most sessions are uneventful: at 30,000 Hz and 2,500 Hz many people feel nothing at all, and at 15 Hz a light tingling is normal. If you feel unwell during or after a session (dizziness, nausea, headache or any other discomfort), stop the session and rest. If a symptom continues, talk to a health professional; don’t wait it out.
One of the two copper rods emits the signal, thus creating an electric tingling sensation, while the other only receives it and therefore has no active role during the session. These can be reversed or placed regardless of the direction of the current. The chosen frequency always takes the shortest path between the two copper electrodes, hence the importance of having the possibility of moving them away from each other. Unfortunately, this is impossible with several other models of devices on the market that offer simple round copper pads nested in a case that must be glued to the body.
Copper care. Copper naturally oxidizes with skin contact and becomes slightly brown or greenish over time. This only changes its appearance. If you prefer a bright finish, clean the rods with a melamine (magic) sponge or a mild metal cleaner. After each session, rinse, wash and dry the skin that was in contact with the copper.
If you think you have parasites or an infection, see a doctor. Symptoms such as digestive trouble, fatigue, itching or cravings have many possible causes and need a proper diagnosis. A zapper does not replace medical care. To learn more about how frequency zappers work and what the evidence says, read our guide What is a parasite zapper?
Recommended session schedule:
- Month 1: ionic foot bath sessions only, two or three a week (VitalBody owners)
- Month 2: one 10-minute Zapper session a day
- Month 3: up to three 10-minute Zapper sessions a day
- Then: stop the Zapper sessions and take a break
- Frail health or several medications: start with a few 5-minute sessions, after checking with your health professional
Our user manual suggests introducing the Zapper gradually. Owners of the 3-in-1 VitalBody usually start with a month of ionic foot bath sessions only. In the second month, they add one 10-minute Zapper session a day; in the third month, up to three 10-minute sessions a day. Then they stop the Zapper sessions and take a break. On days with both, run the Zapper before or after the foot bath, never at the same time. If you’re in frail health or take several medications, start with a few 5-minute sessions and check with your health professional first. The full step-by-step instructions are in the user manual included with the device.
Why copper rods?
Copper is an excellent electrical conductor, which makes it ideal for passing the Zapper’s weak signal through the skin. Our rods are 5 inches long and 3/4 inch wide: they are comfortable to hold and easy to place opposite each other, in the hands, under the feet or on the hips. Because the signal always takes the shortest path from one rod to the other, being able to move them apart is useful, which is harder with devices that use small round pads glued to the body. Wetting the skin and the rods before a session gives better contact.
Contraindications:
- Pregnant or breastfeeding women;
- Pacemaker or defibrillator;
- Chemotherapy or radiation in progress;
- Dialysis/Severe renal impairment;
- Medicated chronic epilepsy;
- Heart problems;
- Metal prostheses.
Important notes:
- Drink water before and after each session;
- Stop the session in case of intense or persistent discomfort;
- Avoid touching the copper rods with open wounds;
- Avoid late-evening sessions if they keep you awake;
- Clean the main unit with a damp cloth, without chemicals;
- Never submerge the main unit in water, and handle it gently;
- For certain situations, such as children under 6, older adults, frail health or several medications, start gently with sessions of only 5 minutes;
- Vary the frequency from session to session, as described in the manual;
- Never use the Zapper while your feet are in the water with the ionizer and the wristband on you. Always remove the foot bath accessories before using the Zapper;
- The heating belt is optional and can be used on its own or with the other functions of the 3-in-1 VitalBody;
- The ionic foot bath and the Zapper do not work at the same time.